Back to Technology and products

Technology and products

Cruisin Brain

One brain. Almost any electric vehicle.

Developed by Nathan Aherne. Offered commercially through TecHaus.

What it is

Cruisin Brain is a modular, configurable, drive-by-wire control system. It was developed to coordinate electric-vehicle inputs, sensors and motor controllers across different vehicle configurations.

Nathan Aherne developed the technology. TecHaus offers it commercially for licensing, OEM partnerships, bespoke controller integration and paid engineering. Publishing this page does not transfer ownership of the technology to TecHaus.

Development has continued since 2017, across more than one hardware configuration. The published record is the firmware repositories and the custom electric cars the controller was first built for. That record is not a certification, a production release, or an approval for every vehicle type.

Controllers and inputs in the published firmware

The description on this page follows the public firmware. It is Arduino-style C++ for STM32 development. The settings file selects a Black Pill board. The project README identifies that board as the STM32F401CCU6 WeAct Black Pill, and says the code has also been built on earlier STM32 boards. The repository also includes pin maps for a Maple Mini and for ESP32.

The firmware commands an external motor controller over serial or PWM. The repositories describe that design as motor-controller agnostic, meaning another controller can be integrated if it accepts those commands. Published integration code exists for three controllers:

  • Dimension Engineering Syren50, using serial commands
  • Dimension Engineering Sabertooth 2x32, using serial commands
  • REV Robotics Spark, using a PWM servo-style signal

A controller outside that list needs its own integration. The settings file marks 2x2 and 4x4 drive layouts, skid steer and power steering as not implemented. Those are not current features.

The implemented throttle mode is named Normal. It reads an analog throttle or digital momentary switches. The simplest documented arrangement uses two momentary switches: one requests forward, both together request reverse, and neither requests a stop unless cruise control is enabled. Digital inputs are also defined for reverse enable, brake and cruise control.

The settings file names joystick, PPM and PWM radio-control throttle types. The published control loop implements the Normal mode, so joystick and radio-control inputs are not described here as finished features.

Cruise control is configurable in the firmware. The repository warns that, while it is enabled, the controller can keep commanding forward motion without a continuing driver input. It is not presented here as a safety feature.

Development record

Cruisin Brain was first built as the drive-by-wire controller for custom electric cars Nathan Aherne made for his children and their friends, including cars based on mobility scooters. The build notes for that project are linked below.

The firmware repository was created in 2017, and the project description says the system has been in development and use since 2017. That is the evidence this page uses. It does not show fleet deployment, road approval, or defence use.

Potential applications

The uses below can be discussed. They are not claims of a completed deployment, a tested autonomous system, or a defence program.

  • Specialist and low-volume electric vehicles
  • Electric vehicle conversions and retrofits
  • Small electric utility, industrial and mobility platforms
  • Robotics and remotely controlled platforms. This is application potential, not a claim that autonomous driving has been tested.
  • Defence and military vehicle projects, including small electric vehicles and retrofits. No defence deployment is claimed.

Suitability for a road, industrial, robotics or defence environment has to be assessed for that environment. This page does not make that assessment.

Engineering heritage

Nathan Aherne has more than two decades of work with drones and related electronic and control systems, including early work with drones. That is founder experience with those systems.

It is not a claim that Cruisin Brain has existed for more than twenty years. Cruisin Brain has been in development since 2017.

Commercial offering

TecHaus will discuss the work below. No price is published, and an enquiry is a conversation rather than an order.

  • Licensing
  • OEM partnerships
  • Bespoke controller integrations
  • Paid engineering development

Enquiries use the existing TecHaus contact form and the team mailbox. This page does not add a new address.

Documentation

These are the public sources for the technical description above.

Commercial enquiry

Licensing, OEM, integration and engineering

Talk to TecHaus about licensing Cruisin Brain, an OEM partnership, integrating a motor controller, or specialist engineering. The enquiry uses the existing TecHaus contact form.